How to build a computer yourself (complete guide from a to z)
In our article today, we will talk about how to assemble a personal computer on your own. The detailed step-by-step instructions below are a complete guide that describes the process from A to Z. Let's get right down to business and figure out how to properly build your PC.
Budget planning
Initially, we need to understand how much money we have to buy all the components. We will deliberately not indicate prices, since the national currency is constantly getting cheaper and in a few months, the given values could become irrelevant. You, at the moment when you read the article, visit the network and select the components depending on the amount available.
We are moving on.
Purchasing a Hull
It would seem that the case is not a very important detail. However, this is not the case. It is on the case that we do not recommend saving. Choose the future house of your computer, which has a filter in the suction path. This will make dusting less frequent. In addition, the metal of the structure itself should be thicker. And in conclusion, we note the fact that the case must be bought already with an integrated power supply. This will give another bonus, since in pairs, these components are cheaper.
Installing the motherboard
Now that we have the case, let's start building the PC. To do this, initially screw the motherboard. Use special screws, each of which must be installed in its place. When this is done, connect both power cables. You cannot mix them up.
Expert opinion
Basil
Project manager, comment moderation expert.
Also Read: 10 Best Operating Systems for Personal Computers: Differences, Advantages and Disadvantages
Ask a Question We do not recommend rubbing the motherboard, as this generates static electricity, which can damage delicate components.
Install CPU, RAM and SSD
Now that the motherboard is installed, let's install both the CPU, RAM, and our SSD. Depending on the slot, the CPU may be installed differently. But in any case, you need to apply a thin layer of thermal paste to the top of the case and only then screw on the cooling radiator.
The RAM must also match the standard used on the motherboard. Most often it is DDR4. Install it in the slot, paying attention to the special slot (key) in it. Screw the SSD into the appropriate pocket with two screws and attach the power connector (coming out of the power supply) and data cable to it. This is the so-called SATA cable, and it is purchased separately.
You can install a video card, but you can not. This part is the most expensive and often users buy it in addition after some time. However, in this case, you need to buy a motherboard with its own video output.
Attention: Please use a solid-state SSD drive. The use of HDD disks as a system carrier will lead to a critical drop in computer performance!
We connect the monitor
Now that we have assembled our computer, we can move on to connecting the monitor. To do this, use the cable that your system unit is equipped with, as well as the monitor itself.
OS installation
Now that everything is ready to run, we can proceed to install our operating system. We will not talk about this in detail, since such an instruction will take up a lot of space. We recommend that you familiarize yourself with the relevant guides that we have prepared earlier.
Attention: install the Windows 10 operating system. Other versions of the OS from Microsoft are very outdated and may be unsafe!
Video instruction
We also recommend watching a tutorial video on the topic. It has many nuances that we did not have time to talk about.
See also: JBL Quantum 350 Wireless gaming headset review
Finally
Now that you know how to build a computer yourself, you can get down to business. The above complete guide covers the situation from A to Z. Therefore, most likely, you will not have any difficulties. And if so, you can always ask any question to one of our experts.